Jantzen Audio Cross Cap
Capacitor from Jantzen Audio Cross Cap series
Capacitor from Jantzen Audio Cross Cap series
Jantzen Audio Cross Cap MKP capacitors, which they call Cross Cap has got the best sonic quality and the best electrical peculiarity.
It is made of one of the best foils in the world produced by Tervakoski Company in Finland.
This capacitor do not make any unpleasant distortion on sound and do not "colour" the sound.
It´s quality is long lasting.
Specs:
• Capacitors are wound from metallized (ZnAl) polypropylene foil.
• Fronts are sprinkled with Zn powder, which guarantees firm contact to terminal leads and are further flooded with epoxy resin.
• The body of the capacitor is firmed by self-adhesive tape.
• Terminal leads are made from round tinned copper wire.
• Capacitor parameters are related to standard IEC 384-16.
• Voltage rating: 400V DC
• Tolerance on capacitance: 5%
• Climatic category: 40/85/21
• Loss factor at 1 kHz (maximum)
• C< l uF : 5 * 104
• C> l < 20 uF : 105
• C> 20 uF : 105
• Insulation resistance at 1 kHz
• C < l uF : 5 * 104 MOhm
• C > l < 20 uF : 3 * 104 MOhm
• C > 20 uF : 104 Mohm
| Capacity μF |
Measurements Øxl | Weight g/pc |
| 1 | 11x24 | 2,5 |
| 1,5 | 13x24 | 4 |
| 2,2 | 16x24 | 5,3 |
| 2,7 | 17x24 | 5,7 |
| 3,3 | 16x35 | 6,8 |
| 3,9 | 17x35 | 8,4 |
| 4,7 | 19x35 | 11 |
| 5,6 | 21x35 | 12 |
| 6,8 | 22x35 | 14,1 |
| 8,2 | 25x35 | 16 |
| 10 | 27x35 | 20 |
| 15 | 30x44 | 29 |
| 18 | 31x44 | 34 |
| 22 | 32x44 | 41 |
| 27 | 31x56 | 52 |
| 30 | 35x56 | 55 |
| 33 | 37x56 | 58 |
| 39 | 39x56 | 70 |
| 47 | 44x56 | 79 |
| 68 | 48x62 | 110 |
| 82 | 52x62 | 130 |
| 100 | 57x62 | 150 |
| 120 | 34x110 | 151 |
| 150 | 47x110 | 185 |
| 220 | 54x108 | 240 |
| 270 | 62x110 | 314 |
| 330 | 68x110 | 375 |
No customer comments for the moment.
Only registered users can post a new comment.
No products
Shipping
0,00 €
Total
0,00 €
No new products at this time